CHAPTER
2
Manual No. 016-5030-010 Rev. A 3
C hapter 2
Introduction
Congratulations on your purchase of the SmarTrax system! This system is designed to provide cutting-edge,
hands-free steering of the machine via Global Positioning System (GPS) coordinates.
This manual applies to the following machines:
MAKE: RBR
MODEL: Vector 300 LS/Venturi LS
YEAR: 2013
FIGURE 1. RBR Vector 300 LS
Preparing for Installation
Before installing the SmarTrax system, park the machine where the ground is level, clean, and dry. Turn off the
machine and leave it turned off for the duration of the installation process. Bleed pressure from the hydraulic
system by loosening the hydraulic fittings slowly, where applicable.
To Next Page
Loading...
Need help?
General
