Set
the
date and
time
1 P r e s s
MENU
.
2 S e l e c t
[CLOCK]
>
[SET DATE/TIME],
then press
[OK]
to confirm.
3 Press the numeric buttons to enter the date, then press
[OK]
to confirm.
»»
On
the
handset
,
the time
set menu is
displayed.
4 Press the numeric buttons to enter the time.
•
If
the time is in 12-hour format,
press
/
to select
[AM]
or [PM].
5 Press
[OK]
to confirm.
What
is standby
mode?
Your phone is
in standby
mode when
it
is idle. The
standby
screen displays
the
handset name, handset
number
,
date and
time, signal icon,
and battery icon.
Check
the
signal
strength
It displays the link status between the handset and base
s
t
a
t
io
n
.
The
signal
icon was shown
steady on
when handset is linked
with base.
Ensure
the handset is linked to the base station before you make or receive
calls
and carry out the
phone functions
and features.
If you hear warning tones when you are on the
phone,
the
handset
is almost
out of battery or the
handset
is out of
range. Charge
the battery or move the
handset closer
to the
base
station.
Self
-defined
settings
Customize
the
settings
to
make
it your own phone.
Personalize the phone
display
Name
the handset
The
name of the handset can be up to 12
c
ha
r
a
c
t
e
r
s
.
It is displayed on the
handset screen
in standby mode.
1 Press
MENU
.
2 Select
[PERSONAL SET]
>
[HANDSET NAME],
then press
[OK]
to confirm.
3
Enter
or edit the
name. To erase
a
character
,
press
[B
A
CK].
4 Press
[OK]
to confirm.
»»
The setting is
saved.
Set
the
display
language
1 Press
MENU
.
2 Select
[PERSONAL SET]
>
[LANGUAGE],
then press
[OK]
to confirm.
3 Select a
language,
then press
[OK]
to confirm.
»»
The setting is
saved.
To Next Page
Loading...
Need help?
General
