Through
the base
1 Press to turn on/off the
answering machine
in standby mode.
Note
••
W
h
e
n
the
answering machine is switched o
n
,
it
answers incoming calls
after
a
certain number
of
rings based
on the ring delay setting.
Set
the
answering machine
language
Note
This
feature only applies to models with
multiple-language
support.
The answering machine language is
the
language
for the announcements.
1 Press
MENU
.
2 Select
[ANSWER MACHINE]
>
[SETTINGS]
>
[L
ANGU
A
GE].
3 Press
[OK]
to confirm.
4 Select a
language,
then press
[OK]
to confirm.
»»
The setting is
saved.
Set
the
answer
mode
You
can set the answering machine and select if the callers can leave
messages. Select [ANSWER
&
REC.]
if you allow the
callers
to
leave messages.
Select [ANSWER ONLY]
if you forbid the
callers
to
leave
messages.
1 Press
MENU
.
2 Select
[ANSWER MACHINE]
>
[ANSWER MODE],
then press
[OK]
to confirm.
3 Select an answer mode, then press
[OK]
to confirm.
»»
The setting is saved.
Note
••
If the memory
is full,
the
answering machine switches
to
[ANSWER
ONL
Y]
mode automatically.
Announcements
The
announcement
is the
message
your caller hears when the answering
m
a
ch
i
n
e
picks up the call
.
T
h
e
answering machine has 2
p
r
e
-
r
e
c
o
r
d
e
d
announcements:
the
[ANSWER
&
REC.]
mode
and
[ANSWER ONLY]
mode.
Record
an announcement
The
maximum length of the
announcement
you can record is 2
minutes.
The
newly
recorded announcement
automatically
replaces
the old one.
1 Press
MENU
.
2 Select
[ANSWER MACHINE]
>
[RECORD OGM],
then press
[OK]
to confirm.
3 Select
[ANSWER & REC.]
or
[ANSWER ONLY],
then press
[OK]
to confirm.
4 Select
[RECORD OGM],
then press
[OK]
to confirm.
5
R
ecor
ding
starts after the
beep
.