16
CALL
Press DISPLAY/CALL to display the
current information on the screen.
Press DISPLAY/CALL again to clear
the call display.
CHANNEL /
Press and release CH or . The
channel automatically stops at the
next channel set into memory.
For proper operation, before select-
ing channels, they should be set into
the memory. See pages 18 and 19
“Memorizing channels”
QUICK VIEW
This button allows you to go back to
the last channel selected by press-
ing QUICK VIEW. Press QUICK
VIEW again to return to the last
channel you were watching.
SLEEP
To set the TV/DVD to turn off after a
preset amount of time, press SLEEP
on the remote control. The clock will
count down 10 minutes for each
press of SLEEP (120, 110, ...10, 0).
After the sleep time is programmed,
the display will appear briefly every
ten minutes to remind you that the
sleep timer is operating. To confirm
the sleep timer setting, press SLEEP
and the remaining time will be
displayed for a few seconds. To
cancel the sleep timer, press SLEEP
repeatedly until the display turns to
0.
SLEEP
120
STEREO SAP CH 012
SEL. STEREO
• Channel number or VIDEO mode
•Stereo or SAP (second audio
program) audio status
• Audio output status
Press MUTE to switch off the sound.
The unit’s sound will be silenced and
“MUTE” will briefly appear on the
screen. The sound can be switched
back on by pressing this button
again or one of VOL + or –.
MUTE
MUTE
TV operation (continued)
5M90801A [E] P14-18 28/4/04, 17:3016
To Next Page
Loading...
Need help?
General
