Copyright © 2015 RCA Communications Systems
BRM300D
TM
Professional Digital Two-Way Mobile Radio Instruction Manual
26
the predened alias or ID.
2. Press the [PTT] button to make a call. Note:
If Talk Permit Function is enabled, wait for
the Talk Permit Tone to nish, then speak
clearly into the microphone.
3. The display shows the group/subscriber alias
or ID, and the Group/Private Call icon.
4. Release the [PTT] button to listen. When the
target radio responds, the LED blinks green.
5. If there is no voice activity for a predetermined
period of time, the calls end.
6. Radio returns to the screen you were on prior
to initiating the call.
Emergency Operation
An Emergency Alarm is used to indicate a
critical situation. You can initiate an Emergency
at any time on any screen regardless of any
activity on the current channel.
Your radio supports 3 Emergency Alarms:
• Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
Each alarm has the following types:
• Regular: Radio transmits an alarm signal
and shows audio and/or visual indicators.
• Silent: Radio transmits an alarm signal
without any audio or visual indicators. There
will be no response (call) from the target radio
until you press the PTT button to initiate the
call.
• Silent with Voice: Radio transmits an alarm
signal and is able to receive an incoming call,
without any audio or visual indicators, until
you press the [PTT] button to initiate, or
respond to the call.
To Next Page
Loading...
General
