Copyright © 2015 RCA Communications Systems
BRM300D
TM
Professional Digital Two-Way Mobile Radio Instruction Manual
36
ADVANCED FEATURES (Continued)
2. Press [▲] or [▼] to navigate to Inbox and
press [VK] to select.
3. Press [VK] to select the current message
and press [VK] again to reply, forward or
delete that message. Unread messages are
indicated with an exclamation mark. (!)
Writing and Sending Text Message
1. Press [VK] to access the menu.
2. Press [▲] or [▼] to navigate to Messages and
press [VK] to select.
3. Press [▲] or [▼] to navigate to Write and
press [VK] to select.
4. A blinking cursor appears, use the keypad to
type your message. Press [▲] to move one
space to the left. Press [▼] or [#] to move
one space to the right. Press [*] to delete
unwanted characters.
5. Press [VK] once message is composed.
6. Press [▲] or [▼] to go to the required alias
or ID and press [VK] to select the name. OR
press [▲] or [▼] to access Manual Dial and
press [VK]. Input subscriber ID and press [VK]
to conrm.
7. The radio display shows Text Message:
<Subscriber/Group Alias or ID>, which
conrms your message is being sent.
8. If the message is sent, a tone sounds and the
display shows Message Sent. If the message
is not sent, a low tone sounds and the
display shows Message Send Failed. If the
text message fails to send, the radio returns
you to the Resend option screen.
Sending a Quick Text Message
Your radio stores a maximum of 10 Quick
Text messages as programmed by your RCA
Communications Systems dealer. While Quick
Text messages are predened, you can edit each
message before sending it.
To Next Page
Loading...
Need help?
General
