VCR
POWER
OFF
AUDIO
DATE/TIME/CHAR––SET
•30•40
NAP
SHOT
TRACKING
R/M
PLAY/PAUSE
STOP
FF
REW
RCH
RF
DC OUT
VIDEO
L
E
N
S
C
O
V
E
R
CAMERA
Recording
32
Time Counter
The time-counter display shows the actual time elapsed when playing back a segment
of tape. The memory-stop feature helps locate a certain point on the tape. When
memory stop is on, the tape will stop automatically during rewind or fast forward
when the time counter reaches M 0:00:00.
To Use the Memory-Stop Feature
1. Locate the place on the tape you want
to return to, place the POWER switch
in VCR, and press COUNTER R/M for
more than two seconds to reset the
counter to 0:00:00.
2. Press COUNTER R/M for less than
one second to turn the time counter’s
memory-stop feature on or off. When
memory stop is on, an M appears
before the time counter in the
viewfinder.
3. Continue to play the tape. When you
want to return to the place you marked,
press the STOP button.
4. Press REW. The tape will rewind to
the time counter reading of M 0:00:00.
M 0:00:00
COUNTER
R/M Button
POWER Switch
Thumb Trigger
STOP
Button
REW
Button
Time Counter With
Memory Stop Turned On
To Next Page
Loading...
Need help?
General
