RCA Full Logic Controlled Stereo Cassette Deck User Manual

12
SINGLE PLAYBACK (EITHER
DECK I OR DECK II)
1. Load a prerecorded tape in DECK I or II.
2. Set the DOLBY NR switch.
• Always set the switch to the same
position that was used for recording.
3. Set the REV MODE switch (see page 10).
4. Set the stereo amplifier for tape playback.
5. Press the playback (3 or 2) button of either
DECK I or II.
To stop playback temporarily (DECK II
only)
Press the pause (8) button.
• To resume playback, either press the
pause (8) button again, or press the
playback (3 or 2) button.
To stop playback
Press the stop (7) button.
NOTE: When the play button (forward) is
pressed during fast forward, the unit will play
back in the reverse direction, and then play back
in the forward direction. (vice versa for reverse)
Example: When 3 is pressed during fast
forward:
PLAYBACK
Fast
forward
Forward
play
=
stop
=
Reverse play
(0.5 seconds)
=
stop
This function allows you to skip unrecorded
portions of the tape during playback.
Set the REV MODE switch to .
NOTES:
• When the REV MODE switch is set to the
position, the relay mode will be
selected.
• When this mode is selected, if the tape
deck encounters an unrecorded portion
of tape more than 15 seconds in length, it
will fast forward the tape until it
encounters another recorded portion,
and resume playback from that point.
REV MODE
Opπ
RELAY/SKIP
BLANK SKIP
=
AUTO REVERSE
AUTO TAPE SELECTOR
PLAYBACK
AUTO REVERSE
AUTO TAPE SELECTOR
RECORD • PLAYBACK
SCT-570 FULL LOGIC STEREO CASSETTE DECK
NORMAL
STOP STOP
HIGH REC MUTE RECORD
POWER
EJECT EJECT
— OFF _ ON
HIGH SPEED DUBBING SYSTEM
AUTO MUSIC SEARCH
MIN MAX
REC LEVEL
REV MODE
RELAY/SKIP
COPY I II
3
DECK II DECK I
DOLBY NR
OFFBC
DECK II
AMS
AMS
+
–
+
–
DECK I
DECK II
$
OSR
(5) (1)51
2
3

RCA Full Logic Controlled Stereo Cassette Deck Specifications

General

Brand	RCA
Model	Full Logic Controlled Stereo Cassette Deck
Category	Cassette Player
Language	English