Powering Your Camcorder
19
DISPLAY
REC
EJECT
REW
PLAY
FF
PAUSE
STOP
FOCUS
ON/OFF
DATE
FADE
POWER
CAM OFF VCR
POWER
SAVE
ON
COUNTER
RESET
AUTO
BATT
MEMO
REC
START/
STOP
REFRESH
POWER
CHARGE
Use the Adapter/Charger
1. Plug one end of the DC power cord into the
DC OUT jack on the adapter/charger and the
other end to the DC IN 6.5V jack on the back of
the camcorder.
2. Plug the adapter/charger’s plug into the nearest
AC outlet (100-240V, 50/60Hz). The POWER
indicator will light.
Note: The battery level indicator has no meaning when
you power the camcorder with the adapter/charger.
Remove the Adapter/Charger
1. Unplug the adapter/charger from the wall outlet.
2. Disconnect the DC power cord from the
camcorder and adapter/charger.
Using an Optional Plug Adapter
An optional plug adapter may be required in some
countries.
Adapter/Charger
The adapter/charger lets you power your camcorder directly from standard household power.
It operates on 100-240 volts, 50/60 Hz, so it can be used virtually anywhere in the world to
power the camcorder or recharge the battery. You may need a plug adapter in some countries.
Consult your dealer.
1. Plug the adapter/charger’s plug into the AC plug
adapter.
2. Plug the AC plug adapter into an AC outlet
(100-240V, 50/60Hz).
Optional AC
Plug Adapter
DC IN 6.5 V Jack
DC Power Cord
To AC 100-240V, 50/60 Hz
POWER Indicator
DC OUT Jack
AC 100-240V
To Next Page
Loading...
Need help?
General
