DISPLAY
REC
EJECT
REW
PLAY
FF
PAUSE
STOP
FOCUS
ON/OFF
DATE
FADE
POWER
CAM OFF VCR
POWER
SAVE
ON
COUNTER
RESET
AUTO
BATT
MEMO
REC
START/
STOP
29
Special Features (continued)
Auto Mode
Place the SCENE SELECT control to AUTO to have
the camcorder control focus and set the shutter speed
to 1/60 second.
When you begin recording, the REC and PAUSE
indicators appear briefly in the viewfinder twice
their normal size.
Tape Positioning
Place POWER in VCR, and make sure the camcorder
is stopped.
• Press FF (fast forward) on camcorder or F.FWD
on remote to fast forward the tape.
• Press REW (rewind) to rewind the tape.
• Press and hold FF (fast forward) on camcorder or
F.FWD on remote (or REW) during tape
positioning to visually search the tape.
Release the button to return to fast forward or
rewind operation.
• Press STOP to stop fast forward or rewind.
MIC (Microphone) Jack
Plug an optional external microphone into the MIC
jack located behind the AV TERMINAL cover.
When a microphone is plugged into this jack, the
camcorder’s microphone is automatically turned off.
Flying Erase Head
A separate erase head is mounted on the spinning
headwheel (hence the term “flying”). This allows
you to make clean edits without the “glitches” or
“rainbow noise” that may occur at the beginning and
end of each recording.
REW (Rewind) Button
FF(Fast Forward) Button
POWER Switch
SCENE SELECT Control
MIC
VIDEO
AUDIO
PUSH
IN AV OUT
MIC (Microphone)
Jack (Located Under
Small Cover)
To Next Page
Loading...
Need help?
General
