28
Special Features
Quick Review
When the camcorder is in record pause, press and
release SCENE SEARCH – to review the last few
seconds of recorded material. The camcorder will
return to record pause.
Note: Do not hold SCENE SEARCH –, or the camcorder
will go into camera edit.
Camera Edit
This feature lets you position the tape while the
camcorder is in record pause.
• Press and hold SCENE SEARCH – to visually
search the recorded tape in reverse.
• Press and hold SCENE SEARCH + to visually
search forward on the recorded tape.
Release the button to have the camcorder return to
record pause at that point on the tape.
Microphone
The microphone picks up the sound during a
recording. It is more sensitive to sounds coming
from the direction the lens is pointed.
Tally Light
The tally light flashes when the camcorder is in
record pause.
• The tally light will turn off if you start recording
with the thumb trigger on the camcorder or place
ON/POWER SAVE in POWER SAVE.
• The tally light will light continuously if you start
recording with START/STOP on the remote.
Automatic Head Cleaner
The camcorder has an automatic head cleaning
system. Whenever a cassette is inserted or removed,
head cleaning is activated. This system minimizes
the need for accessory cleaners or cleaning by a
Servicenter.
Microphone
Tally Light
SCENE SEARCH –
and + Buttons
REC
REW PLAY F.FWD
STOP
F. ADV PAUSE SLOW
ZOOM
SCENE
SEARCH
COUNTER START
DISPLAY
RES MEM
STOP
SCENE SEARCH –
and + Buttons
REW (Rewind)
Buttons
STOP Button
F.FWD (Fast
Forward) Button
START/STOP Button
To Next Page
Loading...
Need help?
General
