In order to adjust most of the options inside the On Screen Display (OSD), the picture below
shows all the buttons used on the remote control.
– This button opens the
OSD and also exits the OSD
by going to the previous
level of the OSD.
– This button exits the OSD
entirely.
Ÿ – This button changes the channel to
a higher number and also functions as
up direction in the OSD.
ź – This button changes the channel to
a lower number and also functions as
down direction in the OSD.
Ż – This button decreases the volume
and also functions as left direction in the
OSD.
Ź – This button increases the volume
and also functions as right direction in the
OSD.
ENTER – This button changes the
channel in conjunction with the number
pad and also functions as ENTER for
selecting options in the OSD.
In order to provide more than one type of OSD control buttons, the side panel’s buttons have
also been made functional for adjusting the OSD.
1. INPUT – This button acts as the enter button to enter each
function or option.
2. MENU – This button opens the OSD and also exits out of menus.
3. V(+/-) – These buttons functions as left/right direction in the OSD or
increases/decreases the value of an option.
4. P(+/-) – These buttons functions as up/down direction in the OSD.
To Next Page
Loading...
Need help?
General
