9
Operating the Radio
Built-In AFC
The Built-In Automatic Frequency
Control (AFC) works only on FM. It
helps to reduce drift on FM reception
and to keep the radio locked in on the
FM station to which it is tuned.
Antennas
AM Antenna - A built-in ferrite rod
antenna eliminates the need for an
outside antenna for AM reception.
Rotating the unit slightly may improve
reception of distant AM stations.
FM Antenna - The power cord acts as
your FM antenna. The power cord
picks up moderate to strong stations
and eliminates the need for an external
antenna in most strong signal areas.
Be sure the power cord is stretched out
to its full length. Do not coil or bunch
the cord together. Changing position
of the power cord may improve
reception.
Turning on/off the Radio
Press RADIO ON/BAND to turn on the
radio.
Press OFF to turn off the radio.
Selecting Bands
Press RADIO ON/BAND repeatedly to
select between FM and AM band.
Tuning to Stations
Press REV to search down radio
frequency.
Press FWD to search up radio
frequency.
Press and hold REV or FWD to
automatically search for the next
station in the respective direction.
EN
Untitled-2 4/1/03, 3:48 PM11
To Next Page
Loading...
Need help?
General
