14
Operating the Clock
EN
Snooze Alarm Operation
This operation allows extra sleep time
after the alarm is on. The alarm will
be off by pressing SNOOZE until the
snooze period is over. Snooze function
can be used repeatedly up to 2 hours.
After this, the alarm will turn off until
the next alarm conditions are met. Set
the “quiet” period as follow:
1. Press and hold SNOOZE.
2. Press REV or FWD to set the “quiet”
period (the default time is 9 minutes)
from 1 minute to 30 minutes.
Release button, then, the “quiet”
period is set.
Weekend cancel
If the weekend cancel function is
activated, the alarm will be active
during MON to FRI, and inactive during
SAT and SUN.
Activate Weekend Cancel Function
• Press and hold the WEEKEND CANCEL
button until the WEEKEND CANCEL icon
remains lit on the display.
Deactivate Weekend Cancel Function
• Press and hold the WEEKEND CANCEL
button to cancel this function (the icon
“Weekend Cancel” will disappear.)
Seconds Time Display
The unit may display in seconds.
1. Press and hold REV or FWD to show
seconds display.
2. Release REV or FWD to return to
the hour and minute display.
Display Brightness
You can adjust the backlight of the display
with the DISPLAY BRIGHTNESS button.
There are three levels you may select from:
Observe the change when you press
DISPLAY BRIGHTNESS repeatedly.
Untitled-2 4/1/03, 3:48 PM16
To Next Page
Loading...
Need help?
General
