RCA RS2531 User Guide

RS2531-EN 3/6/01 2:51 PM Page 12
1.PressSOURCEto select TUNER.
2.PressBAND to select between AM or FM radio
band,
Tip:Youraudiosystemhas32presetstaticss.
Setting Presets
1. PressSKIP FORWARD/BACKWARD to accessthe
desired frequency.
2. Pressthe SETbutton once.
3.The most recently accessedprogram location will
be displayed.
4. If a different program location ispreferred, press
SKIP BACKWARD I FORWARD to move to the
desired preset number (1-32).
5. PressSET to store the selected frequency at that
preset.
Tuning to a Station
PressSKIP FORWARD/BACKWARD to select fre-
quencies.
Suppressing Stereo Signal
PressFM STto toggle between FM mono and stereo
for stereo FM stations. (Remote Only)
Using Presets
The tuner can be either
TUNEor PRESETmode,
When in PRESETmode, the PROGlight ison.
PressSKiP BACKWARD or SKiP FORWARD on the
main systemor PRESETUP or DOWN on the remote
control to accessthe previous or next preset station,
The display first shows the preset program number
and after a few seconds, the frequency and preset
program number will be displayed, (FMPR:01isFM
preset 1)
Auto Preset
Programming
(for FM only)
Pressand hold BAND
button for 2 second to scan stations in the selected
band. The stations will then bestored aspreset chan-
nels. A Maximum 32 stations can be stored. Beware of
your preset channels being erased accidentally
becausethe scanning and storing process isautomatic
upon pressing the button.
You can stop the automatic scanby pressing any but-
ton, but the erased stations cannot be recovered.
"°.... .............................................................................................................................................................................. .°,*"
_8

RCA RS2531 Specifications

General

Brand	RCA
Model	RS2531
Category	Stereo System
Language	English