8
CD Player
EN
Repeating the Play Order
Press REPEAT to repeat the current track, current disc,
all discs, or turn REPEAT mode off.
Setting Up a CD Program
You can program the CD player to play up to any 32
tracks on the CDs in the tray.
1. While the CD player is stopped, press PROG/SET to
enter program mode. The system displays the next
available program number: “- - P:01,” with “- -”
flashing, prompts you for the first track in the pro-
gram list.
2. Press SKIP FORWARD / BACKWARD
to select a track
(press DISC SKIP to select
a track from a different
disc).
3. Immediately press PROG/SET to assign the selected
track to the program number. After 3 seconds, you
are prompted for the next track in the program list.
(In CD program mode, PROG icon will be lit.)
Playing a Program List
While in PROGRAM mode, press PLAY/PAUSE .
Displaying the Program List
1. While the CD player is stopped, press PROG/SET to
enter program mode.
2. Press PROG/SET repeatedly to list each track assign-
ment in the program list.
Deleting Program List
While in PROGRAM mode, press and hold STOP
for 5 seconds. They system displays the message
CLEAR.
Skipping a Disc
Press DISC SKIP.
Searching Through a CD
Press and hold SKIP FORWARD / BACK-
WARD to search through a CD as it is
playing.
Tips: You can create a pro-
gram of up to 32 tracks.
Press CD repeatedly to view elapsed track
time, track number, track remain time and
disc remain time(remote only).
Caution: Do not push to force closing of the tray
during CD playback or tray opening.
--P:01
To Next Page
Loading...
Need help?
General
