6
Display Settings
EN
Showing the Demonstration
In all mode, press DIMMER/DEMO to turn on/off
magic demonstration except timer on or sleep mode
is active.
DISPLAY TIMER/CLOCK
Setting the Time
1. Press and hold CLOCK until the hour flashes on
the display.
2. Press SKIP BACKWARD or SKIP FOR-
WARD to set the hour and then press
CLOCK to shift to minute digits.
3. Press SKIP BACKWARD or SKIP FOR-
WARD to set the minute.
4. Press SET to save settings and STOP to quit set-
ting.
Note: When system is ON, you can press CLOCK to
display the current time for about 2 seconds.
Setting the Timer
1. Press and hold TIMER until the ON appear with
the hour flashing ( ON - timer on time )
2. For setting time, press SKIP FORWARD /
BACKWARD to set the hour and then
press TIMER to shift to minute digits.
3. Press SKIP FORWARD / BACKWARD
to set the minute.
4. Press TIMER to change to OF (timer off time) with
hour flashing. Repeat steps 2 & 3 for timer off time
setting.
5. Press TIMER to select source. Press SKIP FOR-
WARD / BACKWARD to select
between CD /TUNER / TAPE)
6. Press TIMER to set volume. Rotate the VOLUME
knob to set desired volume level.
7. Press SET to save settings or STOP to quit setting.
Activating the Timer
Press and release TIMER to turn on/off
the alarm. The alarm is active when the
clock icon indicator is lit.
Adjusting the Display Brightness
1. Press and hold DIMMER/DEMO for more than 2
seconds.
2. While the dimmer is dis-
played, press and release
DIMMER/DEMO to select the
desired level (DIMM 1 - 3).
Note:You can only adjust the dimmer level when
unit is in ON mode, in standby mode the dimmer
level remains at DIMM 3, while in magic demo mode
the dimmer level will be at DIMM 1.
Sleep Mode
You can select the time interval in minutes before
the unit turns off automatically. Press SLEEP on the
remote to select among 120, 90, 60, 45, 30, 15 & 5
minutes. (Remote Only)
DIMM 2
To Next Page
Loading...
Need help?
General
