RT2250 ENG 1/6/00 9:37 AM Page 12
®
ReceiverControls 7.DSP (Digital Sound Processor) & 12. 6 CH (6 Channels)
NIGHT mode Pressto select the inout connected to
1. STANDBY Presscorresponding button to select an external 6-Channel decoder. Press
Toturn the unit on/off. When the the mode(STADIUM/CONCERTI again to return to the most recently
system is turned on. the unit wiltgo THEATER/ARENA/CHURCH/CLUB/ selected source mode. (see "5.1 ch
to the mode it was in before power OFF) you want. Press NIGHT for your Input for Dob_y Digital-on page 11).
off. enjoyment at night (see page 12).
13. TEST/SETUP
2. MUTE 8. MULTI JOG, SET/DEMO When pressing it briefly, a short noise
To mute all audio outputs. When pressing the SETIDEMO (test tone) wit/begenerated in the
repeatedly, the display wilt toggle speakers one by one so that you can
3. PHONES among Audio Source (for DVD, SAT & adjust the volume of individual
Plug your headphones (not supplied) CD). SLEEP mode and DIM selection, speaker. When keep pressing for two
into it for your private enjoyment, seconds, it will enter setup modefor
Speakers will be off when phones are Please refer topage12 for Input speakers and subwoofers. Rotate the
_nserted Signal Setting. n SLEEP mode, you MULTI JOG to choose the options.
can set the receiver to turn off after (refer to "The TEST/SET UP button"
4. Source Buttons 30. 60.90 or 120 minutes.In DIM on page 12.)
Toselect sound source. For example, selection, you can rotate to set the
CD, SATetc. In standby mode. they brightness of the display. Such setting 14. PRESET EQ
are also One Touch Power On keys to wilt be stored. Also use the MULTI Press repeatedly to select the desir-
turn on the receiver directty at the JOG for speakers and sub-woofers able EQ mode (music styte)- CLAS-
source mode you want. setup and preset radio stations selec- SIC. POP. ROCK JAZZ, VOCAL or
tion,
5. Display
To display current status of the receJv- 9. TUNING
er. Pressto select the tuner frequencies
manually.
6. Sound Control
Let you adjust the sound - volume. 10. P.SCAN (Preset Scan)
treble, bass & balance. Tochange the Pressfor about 2 seconds and tuner
FLAT. Your choice wilt be saved auto-
matically.
',r'e,,7o'fuSt oundou,.u,fromcen
ter. surround & subwoofer speakers.
16. VCR2
VOLUME. turn the large central station presets wilt be started auto- For convenient use of your digital
Knob. To adjustTREBLE or BASS. maticalty.
press relevant button and turn the
Knob. To change the volume of indi- 11. SURR. MODE
vidual speaker, press LEVEL button Press repeatedly to select the sur-
repeatedly toselect thespeaker, then round mode youwant ( refer to
turn the knob to adjust the level. ( "Advanced Sound Control" on page
referto"TheTEST/SETUP button" 11.)
onpagel23
camera, familygame machines.
second VCR, etc.
Note: If your video component has
S-Video output, you can enjoy
enhanced video quatity by connect-
ing it to the S-Video jack on receiver
using a S-Video cable (not included)
°... ......................................................................................................................... .,"
8
To Next Page
Loading...
Need help?
General
