RT2250 ENG 1/6/00 9:37 AM Page 15
the remote command.
Note: Once your component isencoded, you can
pressON/OFF on the remote once to turn offthe
component and then followed by the second time
quickly to turn off the receiver (i.e. this unit). If you
only want the receiver to be turned off, select FM/
AM while the unit isON before pressing ONIOFF.
Ti_Q3:
This r_e may not cperate all mDJels of the brands shown.
If batteries are rem3ved frc[nthe battery ccr%oart_entof
the r_mte control,all mm_ry will he lost.Ycu need to re-
enter all previouslyprcgram_d ccdss again.
_he buttons on the remote may not work corresp3ndingly
with t_hoseOn the cm_ccnents brands. Experi_nt with the
rmnDte and your cm_ccnents to see which buttcms work. If
c_ly a few ftmcticnsoperate,check to see if armther ccds
set will w_rk with more huttcns.
Sound Enhancement Systems
This receiver isequipped with several built-in sound
enhancement systemsto give you the sound quality
you have once dreamed of - but now comes true:
DolbyProLogicandDolby3Stereo
This surround system reproduces theater-like surround
sound from Dolby-encoded software. The Pro Logic
mode usesthe built-in circuit to steer the Left, Center,
Right and Surround channel audio signals and uses all
five speakers and an optional subwoofer to play
decoded Dolby Pro Logic program source, suchas TV
and VCR.The 3 Stereo mode will redirect the
Surround signals to the front left and right speakers
when only the front and center speakers are used.
Usethis mode to suit your speaker system configura-
tions (such assize and number of speakers) and type
of program (suchasVCR).
5.1chInputfor DolbyDigital
The Dolby Digital mode lets you enjoy full digital
surround from software processed in the Dolby Digital
formal Dolby Digital provides better sound quality
and more powerful presence than conventional Dolby
Surround.
When the soundtrack of a Dolby Digital movie was
made, all the sound effects are mixed down to six sep-
arate channels of digital audio, and these six channels
of independent digital audio are pressed to asingle
stream of digital data on your DVD. When you play it
byyour DVD player, the receiver decodes this stream
of digital data back to six audio channels for playback.
Dolby Digital isoptimal for DVD and SAT.
This unit isequipped with Dolby Digital 5.1-channel
input terminal sothat you can enjoy enhanced full
digital surround sound. Being different from Dolby
ProLogic in which only four channels ( Front Left,
Front Right, Centre and Rear) are used,the new sys-
tem provides stereo separation of the rear speakers
(Rear-Right Rear-Left ). These 5 channels, together
with the subwoofer channel for basssounds (counted
as 0.1 channel ),constitue as5.1-Channel ( or 6
Channels ) Input for Dolby Digital that brings you the
most sophisicated sound enjoyment.
Press6 CH on the unit or DVDo6 CH button on the
remote to select the input connected to an external 6-
channel decoder. Pressagain return to the most
recently selected mode.You can only adjust Sound
Control, SLEEP mode, DIM selection, Source Buttons
and MUTE when this mode isselected.
Stereo
The Stereo mode usesthe two main channel outputs
from the front speakers. Usethis mode if you have
connected the front speakers only.
"., ....................................................................................................................... ..-"
mll
To Next Page
Loading...
Need help?
General
