RCA RTB1023 User Manual

- 13 -
Overview of Controls
Note
Insert the two “AAA” (included with this unit)
batteries into the remote control prior to use.
STOP
Press to stop playback.
PLAY
Press to start or resume playback.
STEP/
Pause playback, frame advance.
LEVEL
Toggle channels for diff erent level settings. Adjusts
the value using or buttons.
INFO
Accesses the Info menu.
PiP
Press to turn PiP (picture in picture) mode on or
off . This function is only available by Blu-ray discs if
available on disc.
AUDIO
Accesses the audio function. PiP Audio can be selected
through cursor if secondary Audio is available on
the Blu-ray Disc.
SURROUND
In AUX mode, press to show current sound mode
(CH 5.1or STEREO) on the front of Blu-ray disc player
display.
To change the current setting, first press the
SURROUND button, then use
/ buttons on the
remote control to select STEREO or CH5.1.
SUBWOOFER
Press to display current Subwoofer setting (BALANCE/
SOFT/PWRFUL<Powerful>/STRONG).
To change settings, fi rst press to access the current
Subwoofer setting, then use
/ buttons on the
remote control to change the current setting.
MENU
Accesses the disc menu during playback (on DVD).
SUBTITLE
Accesses the subtitle function.
PiP Subtitle can be selected through cursor if
secondary subtitle is available on the Blu-ray Disc.
REPEAT
Press to repeat the current title, chapter, track, or repeat
all. This button is only used for DVD/CD discs.
ANGLE
Accesses the camera angle function for Blu-ray or
DVD discs if available.
AUX
Press to select AUX input source.
BD/USB
Press to select the BD/USB mode.
Dimmer Setup
To adjust the brightness of display on front of Blu-
ray disc player.
Press SETUP button and the “DIM 0” appears, then use
/ buttons to select "DIM 0", "DIM 1" or "DIM 2".
Sleep Setup
Press SETUP button and the “DIM 0” appears. Use
/ buttons to select "SLP OFF", then press the /
buttons select 30M, 60M, 90M or 120M.
The unit will automatically turn off once it counts
down the sleep time.
Test Tone
Press SETUP button and the “DIM 0” appears. Use
/ buttons to select “TEST OFF”, then press /
buttons to select FL (front left speaker), FR (front
right speaker), CT (center speaker), SW (subwoofer), SL
(surround left speaker) or SR (surround right speaker),
then press OK button. You’ll hear a test tone coming
from the speaker you select. Press EXIT button to
exit this function.
To adjust the speaker volume levels, press LEVEL
button and use / buttons to select the speaker
you are testing, then use or buttons to adjust the
value up or down (between -10dB and +10dB).

RCA RTB1023 Specifications

General

Brand	RCA
Model	RTB1023
Category	Home Theater System
Language	English