5. Operating Instruction
Please refer to the User’s Manual for the operating instruction
of the system.
Maintenance & Troubleshooting
How to handle discs Disc Compatibility
● Some DVD discs may have special
requirements for playing, with which this player
may not be compatible. Please refer to
specifications on individual disc.
Discs types
This DVD player can play the following types of
discs: Discs other than listed above cannot be
player by this player.
This player uses NTSC/PAL color system. It cannot
play discs recorded with other systems, such as
SECAM.
Region code
.
Copyright
According to the related law, DVD discs without
proper authorization are not allowed to be copied
broadcast cable broadcast, played publicly or
rented. As DVD discs are anti-piracy the copied
content is distorted.
TV system
Connect this player to a PAL/NTSC compatible TV.
DISC
TYPE
Content Size Total Play time
About 2hrs.
(Single side & single
layer)
About 4hrs.
(Single side & double
layer)
About 4hrs.
(Double side & Single
layer)
DVD
AUDIO/
VIDEO
12CM
About 8hrs.
(Double side & double
layer)
CD-DA AUDIO 12CM About 74 minutes
MP3 AUDIO 12CM About 300 minutes
To handle, clean and protect discs
● Do not touch the playing side of a disc
● Do not stick any paper or glue strip on a
disc.
How to clean discs
● Finger prints and dust on surface can
affect the sound and picture quality.
Clean discs regularly with a soft cotton
cloth from disc center to outside.
● For sticky dust, wipe it with wet cloth and
with dry cloth, Any kind of solvent, such
as diluting agent, gasoline, liquid
detergent, gasoline liquid detergent anti
– static aerosol used for vinylon LP, may
cause disc damage.
How to protect discs
● Keep away from the direct sunshine or
any heat source.
● Do not put discs in damp or dirty places,
such as bathroom or near humidifiers.
Store discs vertically in disc box and
store in a dry place. Piling discs on to top
of each other or excess weight load on
disc box may cause the disc to warp.
- 33 -
When play the region disc with player unconf
you can change the region code,please referr
-ormity,the screen display "WRONG REGION",
-ence the "How to change the region code".
To Next Page
Loading...
Need help?
General
