You cannot be heard by the other party.
• Make sure the handset or headset cord is inserted properly and securely.
• Make sure the MUTE feature is not turned on.
Phone does not ring.
• Make sure the ringer is turned on.
• Make sure the Do Not Disturb feature is not activated.
• You may have too many extension phones on your line. Try unplugging some phones.
• See solutions for “No dial tone.”
• If the phone is an extension, make sure the phone is properly registered with the U1000 base.
Incoming voice too low or none at all.
• Check volume setting.
Memory dialing doesn’t work
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
• Make sure the phone number is formatted properly
Battery icon is blank or shows only one bar
• The 5 “AAA” batteries need replacing or are improperly installed or not installed at all.
Intercom does not function correctly
• Make sure all extension phones are properly registered to the U1000 base.
• Make sure all extension phones are within ranage of the U1000 base and there are no major sources of
interference neaby.
General Product Care
To keep your telephone working and looking good, follow these guidelines:
• Avoid putting the phone near heating appliances and devices that generate electrical noise (for example,
motors or fluorescent lamps).
• DO NOT expose to direct sunlight or moisture.
• Avoid dropping the handset, as well as other rough treatment to the phone.
• Clean the phone with a soft cloth.
• Never use a strong cleaning agent or abrasive powder because this will damage the finish.
• Retain the original packaging in case you need to ship the phone at a later date.
24
To Next Page
Loading...
Need help?
General
