The VCR will only respond to the compatible remote's VCR2,
VCR2oLD, or DVDeVCR2 button. If you change the remote setting
to VCR2, the remote that came with your VCR will no longer
control it.
To change the remote setting back to VCR1, display the
PREFERENCESmenu, press 1, and then press VCR1 on your
compatible remote.
AUTO PLAY
This feature allows the VCR to automatically start playing when
you insert a tape with the safety tab removed. Press2 to switch
between ON or OFF.
Select ON if you want a tape with its safety tab removed to
start playing automatically when the tape is inserted.
Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
EN ERGYSAV ERTM
Bydefault, this VCR automatically turns off after two hours of
inactivity. Press3 to change the time delay, or to disable the
feature.
• OFF:The VCR will remain turned on until you shut it off.
• 1:00, 2:00, or 3:00: The VCR turns off after one, two, or three
hours of inactivity.
Thirty secondsbefore shutting off, the VCR will warn you with a
screen reading, nThe VCR will turn off in 30 seconds. Pressany
key to cancel."
If you use the VCR's tuner instead of your TV to tune channels,
youmay want to turn this feature off.
17
To Next Page
Loading...
Need help?
General
