FRAME ADVANCE
Frame advance lets you view one-stop action frame after
another. Frame advance works best for tapes recorded at the SP
or SLPspeed.
1. PressPAUSE on the remote (PLAYmPAUSEon the VCR) to
"freeze" the action.
2. Press F.ADV each time you want to view a frame of the scene.
3. Press PAUSEor PLAY on the remote (PLAYoPAUSEon the
VCR) to return to normal playback.
INDEX SEARCH
The VCR has a "VHS Index Search System" that automatically
records an index mark on the tape every time you start a
recording. During playback you can locate the program you want
to play by the number of index marks or by scanning. The VCR
will search forward or reverse from the location you are on the
tape.
To Search:
1. PressSEARCH on the remote to display the INDEX SEARCH
menu on the TV screen.
.
.
If you want to search a certain number of index marks, press
two number buttons to enter the number of marks you want
to search. Press CLEARon the remote to correct an entry.
Press FWD to search forward or REV to search in reverse. The
VCR will locate your index mark and begin playback. If you
did not enter a specific index number, the VCR will locate the
next index mark and begin playback.
4. Press STOP to stop index searching.
Some index marks may be missed by the VCR:
• A mark too close to your location on the tape.
• The mark at the beginning of a recorded segment of five
minutes or less.
m The first index mark on the tape when you start at the
beginning of the tape.
INDEX SEARCH
Press REV or FWD
to begin scanning
or
enter a specific
index number
Press SEARCH to Extt
1NDEX SEARCH
Search4ng for
tndex number 12...
Press STOP to cancel
INDEX SEARCH
searching for
4ndex marks...
Press STOP to cancel
39
To Next Page
Loading...
Need help?
General
