CONNECTING YOUR VCR
Refer to these pages to help you connect your VCR.
JACKS AND CABLES
RF Jacks and Antenna Cables (F-type)
The RFjacks provide good picture and mono sound quality, and
must be used if audio/video connections are not available for
your TV.
These jacks are required for antenna or cable-TV connections.
The RFjacks on the VCR are labeled IN FROM ANT. and OUT TO
TV. The antenna cable supplied with your VCR is used to connect
the VCR's OUT TO TV jack and your TV's antenna input.
KFJack
Audio/Video Jacks and Cables (RCA-type)
The audio/video jacks provide very good picture and sound
quality, and can be used if your TV has audio/video input jacks.
These jacks are used for most audio/video connections between
components. The VCR audio/video jacks are color coded (yellow
for video, and white for audio). If your TV has two inputs for
audio (stereo), connect the one labeled mono. If one is not
labeled mono, you may need a Y-adapter.
Audio/Video Jack
44
To Next Page
Loading...
Need help?
General
