5
ENG
2 Location
The first step in setting up the REEFER
™
is to choose a suitable location.
Weight
The flooring directly below the system must be rated to support the
following weight:
Approximate total weight of system including water
Model 170 G2+ 200 G2+ 250 G2+ 300 G2+ 350 G2+
Weight 275Kg/
607lb
315kg/
695lb
380Kg/
840lb
470kg/
1035lb
530kg/
1170lb
Model 425 G2+ 525 G2+ 625 G2+ 750 G2+ 900 G2+
Weight 690kg/
1520lb
850kg/
1875lb
930kg/
2060lb
1110kg/
2460lb
1300kg/
2870lb
Model P-350 G2+ P-500 G2+ PS-700 G2+ PS-950 G2+
Weight 550 kg/
1213lb
761 kg/
1678lb
1087 kg/
2397lb
1460 kg /
3219lb
Model S-850 G2+ S-1000 G2+
Weight 1210kg/
2675lb
1465kg/
3240lb
NOTE: The REEEFER
™
system should not be moved when full of water.
Room temperature
Site selection is important for correct temperature maintenance.
We recommended that you keep the ambient room temperature
a comfortable and stable 22°C / 72°F. Avoid placing the tank in
front of an air conditioner, heating vents or direct sunlight. A well
ventilated room with moderate light is the best place to position
the aquarium.
Accessibility
Ensure that there is at least 10cm / 4” of clearance behind the
REEFER™ to allow easy access for installing/removing cables from
the sump as well as sufficient air circulation for a chiller (larger
models only). It is recommended to leave approximately 60cm/24”
between one of the sides of the aquarium and any adjacent walls
or furniture for access to the rear of the tank.
General considerations
Ensure that the area surrounding the aquarium is waterproof and
consider moving away anything that water might damage or may be
corroded by the salt.
To Next Page
Loading...
Need help?
General