How to Use This Manual
1. Purpose and Target Readers
This manual is designed to provide the user with an understanding of how to use the e
2
studio IDE to develop
and debug software for the RSK platform. It is intended for users designing sample code on the RSK platform,
using the many different incorporated peripheral devices.
The manual comprises of step-by-step instructions to load and debug a project in e
2
studio, but does not
intend to be a complete guide to software development on the RSK platform. Further details regarding
operating the RX111 microcontroller may be found in the Hardware Manual and within the provided sample
code.
Particular attention should be paid to the precautionary notes when using the manual. These notes occur within the body
of the text, at the end of each section, and in the Usage Notes section.
The revision history summarizes the locations of revisions and additions. It does not list all revisions. Refer to the text of
the manual for details.
The following documents apply to the RX111 Group. Make sure to refer to the latest versions of these
documents. The newest versions of the documents listed may be obtained from the Renesas Electronics Web
site.
Document Type Description Document Title Document No.
User’s Manual Describes the technical details of the RSK hardware. RSKRX111 User’s
Manual
R20UT2193EG
Tutorial Provides a guide to setting up RSK environment,
running sample code and debugging programs.
RSKRX111 Tutorial
Manual
R20UT2194EG
Quick Start Guide Provides simple instructions to setup the RSK and
run the first sample, on a single A4 sheet.
RSKRX111 Quick
Start Guide
R20UT2195EG
Schematics Full detail circuit schematics of the RSK. RSKRX111
Schematics
R20UT2192EG
Hardware Manual Provides technical details of the RX111
microcontroller.
RX111 Group
Hardware Manual
R01UH0365EJ
To Next Page
Loading...
Need help?
General
