Reolink RLN16-410 User Manual

Reolink PoE NVR
User Manual
53
Cause 3. Incorrect power supply for the NVR.
Solution:
(1) It might be the problem of the NVR’s power adapter. Please try again with a
different power outlet and power adapter.
Note: For the 8 channel PoE NVR the power adapter is 48V 1.87A. And for the 16 channel PoE
NVR, it’s 48V 2.5A.
(2) If you have a 12V DC adapter on hand, you may use the adapter to power the
camera and connect the camera directly to the router. Please check again whether
the camera displays video loss on your NVR.

Reolink RLN16-410 Specifications

General

Number of users	20 user(s)
Maximum resolution	1920 x 1080 pixels
Video input channels	16 channels
Supported resolutions	1024x768, 1280x720, 1280x800, 1280x1024, 1440x900, 1920x1080
Operating system installed	Embedded LINUX
Product color	Black
eSATA ports quantity	1
USB 2.0 ports quantity	2
Ethernet LAN data rates	1000 Mbit/s
Power over Ethernet (PoE)	Yes
Ethernet LAN (RJ-45) ports	17
Supported network protocols	HTTP, HTTPS, TCP/IP, UDP, DHCP, P2P, UPNP, RTSP, SMTP, SSL/TLS, DNS, DDNS, NTP, FTP
HDD interface	Serial ATA
Maximum storage capacity	12 TB
Total installed storage capacity	3000 GB
Mobile operating systems supported	Android, iOS
Output current	2.5 A
Output voltage	48 V
AC input voltage	100-240 V
Power consumption (typical)	20 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Cables included	HDMI, LAN (RJ-45)
Wi-Fi	No

Weight and Dimensions

Depth	260 mm
Width	330 mm
Height	45 mm
Weight	3000 g