Resource Data Management PR0760-TDB User Manual

Revision 2.6 Page 29 of 53
Intuitive Mercury 6-5M Controller with TDB
www.resourcedm.com
Warning
Please Note
The specifications of the product detailed on this
Set-Up Guide may change without notice. RDM
Ltd. shall not be liable for errors or for incidental
or consequential damages, directly and indirectly,
in connection with the furnishing, performance or
misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
Average & Limit blocks
Icon
Icon
Icon
Icon
Output = (A + B) ÷ 2
Output = (A + B + C) ÷ 3
Output = (A + B + C + D) ÷ 4
If A > B Output = B
If A < C Output = C
If C < A < B Output = A
Range & Min, Max, Avg Block
Range Icon
Min, Max, Avg Icon
Input A: Analogue Value
Input B: Max Limit
Input C: Min Limit
Digital output goes off when the Analogue
value is out with the Max and Min limits.
Input 1-8: Analogue Values
Valid 1-8: If the valid input is present the corresponding
analogue input value will be used by the block.
Min: The minimum value is outputted.
Max: The maximum value is outputted
Avg: The average value is outputted.
Input 1
Valid 1
A
B
C
A
B
A
B
C
A
B
C
Input 2
Valid 2
Input 3
Valid 3
Input 4
Valid 4
Input 5
Valid 5
Input 6
Valid 6
Input 7
Valid 7
Input 8
Valid 8
Min
Max
Avg
A
B
C
D

Resource Data Management PR0760-TDB Specifications

General

Brand	Resource Data Management
Model	PR0760-TDB
Category	Controller
Language	English