Revox C221 User Manual

RÄ/ox
C221 CD
Player
Service
Manual
Balanced outputs:
cr
To measure
the level on the balanced outputs
proceed
as
follows:
r
lnsert the test CD
"Audio
Signals Disc
'1".
o
Left-hand
channel: Connect
the AC voltmeter
to the XLR
connector
24.
.
Play
track number
1.
.-
The measured
level
should correspond
to
your
standard
studio
level.
lf necessary,
this level
can be corrected
with the
potentiometer
RA1 located on
the
line
amplifier board.
.
Right-hand channel:
Connect
the AC voltmeter to
the XLR
connector 25.
.
Play track number
1.
r-
The measured
level should correspond
to
your
standard
studio
level.
lf necessary,
this level can be corrected
with the
potentiometer
RA2
located on
the line amplifier board.
6.4
Frequency
response
(-
To measure
the frequency response
proceed
as follows:
.
lnsert the test CD
"Audio
Signals Disc 1".
.
Left-hand channel:
Connect the AC voltmeter to the PHONO
socket 26 L.
.
Right-hand channel: Connect
the AC voltmeter to the PHONO
socket 26 R.
.
Play track numbers
9 to 23.
rr
The
frequency response from 16 Hz to 2O kHz should be
within 10.2 dB
on
both channels.
42

Revox C221 Specifications

General

Brand	Revox
Model	C221
Category	CD Player
Language	English