9
Operation
Operation through the front panel
The blue standby LED on the glass front
panel lights up after you have made all
the necessary connections and
switched the CD player on through the
switch on the rear of the device. Now,
you can switch the device on by lightly
tapping on the
Power button. The LED
now shows white and is ready to accept
a CD
1
into the CD slot. If there is a CD in
the drive already, you can start playback
with the / buttons.
The following table gives an overview of
the individual functions of the sensor
buttons on the glass front panel.
: min 0.5 sec.)
Long press: Complete reset - (min. 5 sec.)
Short press: Skip to previous track
Long press: Reverse search
2
; LED flashes green
Short press: Switch Pause-Play
Long press: Stop (minimum duration: 1 sec)
Short press: Skip to next track
Long press: Forward search
2
; LED flashes green
Long press: Eject disc (minimum duration: 0.5 sec)
To Next Page
Loading...
Need help?
General
