EasyManuals Logo
Home>Rheem>Water Heater>18

Rheem 18 User Manual

Rheem 18
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
TEMPERATURE CONTROL STANDARD
16
BATHROOM CONTROLLERS STANDARD
The Bathroom controller(s) allows the user to select the temperature setting for the hot water to be used in
the bathroom. They have a minimum temperature setting of 37 C and a maximum temperature setting of:
874 series 50ºC
876 series 48 C
The Bathroom controllers operate in tandem. Whenever an operation is selected on one Bathroom controller,
it is also set on the other Bathroom controller. The Bathroom controllers automatically have priority if they are
on.
Important: It is important to turn on the Bathroom controller before opening a hot tap in the bathroom
(priority is automatically gained). If the Bathroom controller is not on and the Kitchen controller is on (has
priority), then it is possible to receive water at a temperature higher than expected from a hot tap in the
bathroom. This temperature could be up to:
874 series 50ºC if a temperature limiting device is installed in the hot pipe to the
bathroom or up to 60 C if a temperature limiting device is not installed.
876 series 48 C
Notes on the Bathroom controllers:
The controller cannot be turned on whilst a hot tap is open.
When a Bathroom controller is turned on, it gains priority from the Kitchen controller.
The Bathroom controller must be on in order to adjust the temperature setting on the Bathroom
controller.
The Kitchen controller can be turned off from a Bathroom controller.
Press and hold the on / off button on a Bathroom controller for three seconds.
This turns off all the controllers and the displays go blank.
If hot water is flowing from a hot tap, it will go cold.
Warning: It is advised to leave the Bathroom controller on after hot water usage is finished in the
bathroom. Turning off a controller in one bathroom will also turn off the controller in the other
bathroom. The Kitchen controller will gain priority if it is on and the temperature setting can be up to:
874 series 50 C
876 series 48 C
If a hot tap is open in another bathroom, the water will be delivered at this temperature.
integrity
Bathroom Controller

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rheem 18 and is the answer not in the manual?

Rheem 18 Specifications

General IconGeneral
BrandRheem
Model18
CategoryWater Heater
LanguageEnglish

Related product manuals