Rheem 18 User Manual

TEMPERATURE CONTROL – DELUXE
35
Turning Off Bath Fill Mode During Its Operation
The bath fill operation can be interrupted by pressing the BATH FILL button before completion of the bath fill
operation.
If it is necessary to turn off the Bath Fill mode before the operation is complete, during Step 7:
Press the BATH FILL button
At this first press of the BATH FILL button
 Water flow from the hot tap will cease
 The operating light will go out
 The bath fill water volume display panel will show
0 litres.
 The temperature display will go blank
 The bath fill operating light will flash
 The voice prompt will sound
“bath filling has been stopped, please turn off the hot
water tap and press the BATH FILL button to finish”
Close the hot tap
Press the BATH FILL button again
At this second press of the BATH FILL button
 The bath fill operating light and bath fill indicator light
will go out
 The bath fill water volume display will go blank
 Note: If the hot tap has not been turned off, the
voice prompt will sound
“please ensure the bath hot water tap is turned off”
“bath filling has been stopped,
please turn off the hot water tap
and press the
BATH FILL button to finish”
BATH FILL
BATH (l)
40
°C
0
ACTIVE
ON/OFF
BATH FILL
BATH (l)
40
°C
0
ACTIVE
ON/OFF
“please ensure the bath hot
water tap is turned off”
BATH (l)
40
°C
0
ACTIVE
ON/OFF
BATH FILL

Rheem 18 Specifications

General

Brand	Rheem
Model	18
Category	Water Heater
Language	English