Rheem 18 User Manual

TEMPERATURE CONTROL – STANDARD
17
check
h ot w a t e r
te m p e r a ture
b e f o re u s e
on
of f
40
C
prio ri ty
in u s e
42
C
prio rity
in us e
42
C
prio rity
in us e
42
C
prio rit y
in us e
To operate a Bathroom controller:
1. Turn off the Kitchen controller
 If a temperature setting is displayed and the priority light is not glowing, it is advised to turn off the
Kitchen controller.
Refer to the notes on the Bathroom controllers on page 16.
2. Turn on the Bathroom controller
 Press the on / off button.
The on / off operating light and the priority light will both
glow.
The temperature setting of 40 C will be displayed.
3. Select the temperature setting
 Press the up () button or down () button.
 Refer to “Temperature Adjustment – Standard Controller”
on page 13.
The selected temperature setting will be displayed on all
controllers.
4. Open the hot tap
The in use light will glow on all controllers.
5. Close the hot tap
The in use light will go out on all controllers, if no other
hot tap is open.
It is advised not to turn off the Bathroom controller(s).
 Refer to the warning in the notes on page 16.

Rheem 18 Specifications

General

Brand	Rheem
Model	18
Category	Water Heater
Language	English