58
Turn off the gas and water to the water heater by
closing the shut-off valves.
Press the DOWN adjustment button repeatedly
until 100°F (38°C) or shows in the LED display.
Hold the DOWN button until the number on the
display starts to blink.
While the number is blinking, press the UP and
DOWN adjustment buttons at the same time. The
number will stop blinking.
Press the UP or DOWN adjustment button to set
the desired temperature.
Turn on the gas and water to the water heater by
opening the shut-off valves.
2
3
4
5
6
Start/Adjust
Setting the Water Temperature
WiFi Setup
1. Download the EcoNet app to your mobile
device and ensure that the device is
connected to the WiFi network.
2. Press and hold the WiFi button on the
display until the WiFi indicator begins
flashing.
3. Open the EcoNet application and follow the
instructions on the application to connect the
water heater.
USING YOUR WATER HEATER
To Next Page
Loading...
Need help?
General
