7. PRODUCT NAME AND DEVICE NAME
7.1 Overview
The product name is used as a response when the host machine inquires
using the PostScript for Macintosh.
The device name is used for the SCSI device name on the SCSI bus.
Also, the product name will be used for the demo page from this machine.
This information is stored in the SCU.
The product name or device name is forwarded to the host PC through the
main controller, depending on the type of data requested from the host PC.
7.2 PROGRAMMING MODE
The following table shows the programming mode for the production name
and device name.
Mode Method Entry Brand
Name
Product Name Device Name
Vender ID Product ID
OEM Code
Setting
SP 5818
0 Ricoh Ricoh Aficio 401 Ricoh Aficio 401
1 NRG NRG D440/2840/3240 NRG
D440/2840/
3240
2 Not used
3 Savin Savin 9940DPC Savin 9940DPC
4 Not used
5 Infotec infotec 5402 MF infotec 5402MF
6 Lanier Lanier 5040 MFD Lanier 5040MFD
NOTE:
This only needs to be registered if the NVRAM on the SCU is
defective.
A195
Copier
25 April 1997 PRODUCT NAME AND DEVICE NAME
13