Copying Mixed Originals
1. Place Originals in the Document Feeder
Place the smaller sizes at the top of the stack as shown in the image
Adjust the Side Guide flush against the largest original.
Ensure that the right edges of all the sheets are aligned against the
right side guide .
Ensure that all originals are lying face up.
2. Check the condition of the paper stack:
All sheets should lie flat, with no curled or bent edges,
Paper should be clean and feel dry to the touch,
Attachments such as staples, tags or tapes must be removed.
3. Press [Special Original]
4. Press [Mixed Sizes] then touch [OK]
5. Select any additional options
3. If there are multiple paper sizes you must either have all the
sizes in different paper trays, or select the size paper you want
them all to be or they will output al the default auto paper select.
6. Enter desired number of copies
7. Press [Start]
8. Press [Clear Modes] key when you have
finished.
Selecting Duplexing must all be output on the same size.
This will return the document feeder to normal copy mode ready for the
next user.
Acceptable sizes in Inch:11" x 17“ ; 8½" x14" ; 8½" x 11" ;5½" x 8½"
To Next Page
Loading...
Need help?
General
