124
R
i
c
o
h
C
o
.
L
t
d
.
h
t
t
p
:
/
/
w
w
w
.
r
i
c
o
h
.
c
o
m/
Model: M-G1a/M-G1b/M-G1L/M-G1W/R-
G1
Machine Codes:
J017/J019/J021/J023/J018
Slide 124
The printer checks for charge leaks at following times:
Immediately after machine is turned on.
When receiving leak detection signal from HVPS (High Voltage
Power Supply) during printer operation.
When charge leak is detected:
Voltage supply from HVPS is interrupted immediately.
Printer stops current job in progress.
Carriage goes back to home position
Print heads are capped (printing not possible)
To restore printer to normal operation
Remove cause of leak
Turn machine off, and then on again.
Charge Leak Detection
No additional notes.
To Next Page
Loading...
Need help?
General
