Tab Item Settings
Initial Settings Folder Setting [On]
Procedure 2: Settings to Specify Using Web Image Monitor
It is necessary to specify the values in [Device Settings], [Printer], [Fax], [Interface], [Network], [Security]
and [Webpage] in [Configuration] in [Device Management] of Web Image Monitor within the CC-
certified range.
Before specifying system settings, the administrator should refer to the Web Image Monitor help. The
CC-certified Web Image Monitor help can be downloaded from the following URL:
http://support-download.com/services/device/webhlp/nb/gen/v140cc1/en/
The help that appears when the "?" icon (Help button) in Web Image Monitor's header area is clicked
may have changed after receiving CC evaluation.
Before specifying the settings, install the Web browser specified in "CC-Certified Operating
Environment" in this manual on the client computer, and then connect the client computer and MFP to the
network that can be accessed only by the administrator.
For details about how to launch Web Image Monitor, see "Using Web Image Monitor" in "Monitoring
and Configuring the Machine", Connecting the Machine/ System Settings.
1. Specifying [Device Settings]
The administrator must specify the settings in [Device Settings] within the ranges shown in the following
table.
• Set "Kerberos Authentication" "Encryption Algorithm" to the values specified when setting "User
Authentication Management" to [Windows Auth.], as described on page 15 "2. Specifying [User
Authentication Management]"".
Category Item Settings
Device Settings Date/Time
Set Date
Set the appropriate date.
Device Settings Date/Time
Set Time
Set the appropriate time.
Device Settings Date/Time
Time Zone
Set the appropriate time zone.
Preparation for Use
21
To Next Page
Loading...
Need help?
General
