Changing MFP Settings During Operation
Of the settings specified before operation according to the procedure described on page 12
"Specifying the MFP Settings", the following setting can be changed even during operation.
1. Changing [System Settings] Using the Control Panel
Tab Item Settings
Timer Settings Auto Logout Timer Select [On], and then set the range for
the timer between 60-999 seconds.
Interface Settings Network
Machine IPv4 Address
• Specifying a static IPv4 address
Enter the IPv4 address and subnet
mask.
• Obtaining the DHCP server
address automatically
Select [Auto-Obtain (DHCP)].
Interface Settings Network
IPv4 Gateway Address
Enter the IPv4 gateway address.
Interface Settings Network
DNS Configuration
Specify this only if you are using a
static DNS server.
• Specifying a static DNS server
Enter the IPv4 address in "DNS
Server 1", "DNS Server 2", and
"DNS Server 3". (Specify DNS
Server 2 and 3 if required.)
• Obtaining the DHCP server
address automatically
Select [Auto-Obtain (DHCP)].
Administrator Tools Program / Change
Administrator
Administrator 1-4
Specify settings for one or more
administrators.
Specify the administrator's "Login User
Name" and "Login Password".
Assign all administrator roles (user
administrator, machine administrator,
network administrator, and file
administrator) to a single administrator.
Changing MFP Settings During Operation
33
To Next Page
Loading...
Need help?
General
