1. Press [Finishing].
2. Select [Sort] or [Rotate Sort], and then press [OK].
3. Enter the number of copy sets using the number keys.
4. Place your original, and start scanning.
To confirm the type of finishing, press the [Sample Copy] key.
Scan each page of your original.
Press the [ ] key after all the originals have been scanned.
Changing the Number of Sets
You can change the number of copy sets during copying.
• This function can be used only when the Sort function is selected.
1. While "Copying..." is displayed, press the [Stop] key.
3. Copy
68
To Next Page
Loading...
Need help?
General