8. Press the [ ] or [ ] key to select [LAN Type], and then press the [OK] key.
9. Press the [ ] or [ ] key to select [Wireless LAN], and then press the [OK] key.
10. Press the [Escape] key.
11. Press the [ ] or [ ] key to select [Wireless LAN], and then press the [OK] key.
12. Press the [ ] or [ ] key to select [Communication Mode], and then press the [OK] key.
13. Press the [ ] or [ ] key to select [Dir Con: Group Owner Mode], and then press the [OK]
key.
14. Press the [ ] or [ ] key to select [Direct Connection Settings], and then press the [OK]
key.
15. Press the [ ] or [ ] key to select [Device Name], and then press the [OK] key.
16. Press the selection key beneath [Enter].
17. Press the [ ], [ ], [ ] or [ ] key to select a character, and then press the [OK] key to
enter the device name.
18. Press the selection key beneath [Accept] when you finish entering the device name.
19. Press the [ ] or [ ] key to select [Connection Password], and then press the [OK] key.
20. Press the selection key beneath [Enter].
21. Press the [
], [ ], [ ] or [ ] key to select a character, and then press the [OK] key to
enter the connection password.
22. Press the selection key beneath [Accept] when you finish entering the connection
password.
23. Press the [ ] or [ ] key to select [WLAN:EasySetup/Direct Con], and then press the [OK]
key.
24. Press the [ ] or [ ] key to select [Push Button Method], and then press the [OK] key.
25. Press the selection key beneath [Start].
The settings are complete.
Operate the push buttons on the device that you want to connect.
See the instructions supplied for the device for how to connect it by Wireless Direct mode.
Connecting and Setting the Network
21
To Next Page
Loading...
Need help?
General
