5. Memory cover
Open to install a hard disk.
6. Front cover open button
Push this button to open the front cover.
7. Lower paper trays
Load paper here.
For details, see page 24 "Guide to Functions of the Machine's External Options".
8. Tray 1
Load paper here.
9. Front cover
Open to access the inside of the machine and remove jammed paper.
Open here to replace the print cartridge and the drum unit.
10. Main power switch
To operate the machine, the main power switch must be on. If it is off, turn the switch on.
See page 48 "Turning On/Off the Power".
11. Bypass tray
Use to print on thick paper, OHP transparencies, envelopes, and label paper (adhesive labels).
12. Extender for the bypass tray
Pull this extender out when loading A4 , 8
1
/
2
× 11 or larger size paper in the bypass tray.
13. Paper guides
When loading paper in the bypass tray, align the paper guides flush against the paper.
Guide to Names and Functions of Components
7
To Next Page
Loading...
Need help?
General
