1. Before You Begin
What You Need
Use only the tools and materials described in this manual. Using other tools or materials could damage
the machine or cause injury.
1. Hex screwdriver
Use this to remove black hexagonal-head screws from the machine.
2. Drum setting powder pad applicator
Needed to apply a thin coated of powder on the drum.
3. Newspaper or other paper
To prevent toner and other stains getting on the floor, spread sheets of paper out where you intend to place
the removed parts.
• The hex screwdriver and drum setting powder pad applicator are included in the maintenance kit.
Keep them somewhere safe. If the maintenance kit has any items missing, contact your service
representative.
13
To Next Page
Loading...
Need help?
General