Error and Status Messages Appear on the
Smart Organizing Monitor
Message Causes Solutions
Printer Power Off
(Communication
Error)
• The power cable of the
machine is not plugged in.
• The power of the machine
is not turned ON.
• The USB cable is not
connected.
• Check the printer power cord.
• Check the printer power switch is on.
• Check the USB cable is properly
connected.
Out of Paper /
Misfeed
Paper is not loaded in the
machine's input tray, or paper
jam has occurred.
If paper is not loaded, load paper in the
input tray. For details about loading
paper, see page 30 "Loading Paper".
If paper is jammed inside the machine,
remove the jammed paper. For details
about removing jammed paper, see
page 126 "Paper Feed Problems".
Paper Size Mismatch The paper size specified on the
machine and the size specified
in the printer driver do not
match.
• For details about specifying the paper
size setting on the machine, see
page 30 "Loading Paper". For details
about changing the paper size setting
in the printer driver, see the printer
driver Help.
Paper Type
Mismatch
The paper type specified on the
machine and the type specified
in the printer driver do not
match.
• For details about changing the paper
type setting of the machine, see
page 30 "Loading Paper". For details
about changing the paper type
setting in the printer driver, see the
printer driver Help.
Memory Overflow The data is too large or
complex to print.
Select [600 x 600 dpi] in [Resolution:] to
reduce the size of data. For details, see the
printer driver Help.
Print Cartridge Not
Detected
The print cartridge has not been
installed.
Reinstall the print cartridge. See page 119
"Replacing the Print Cartridge".
Error and Status Messages Appear on the Smart Organizing Monitor
145
To Next Page
Loading...
Need help?
General
Weight and Dimensions
