• If the settings are not restored successfully, an error message appears. Try again to restore the file
completely.
Help Source File Setting Tab
Help Source File Setting
Item Description
Help Source File Enter the help source file path.
Energy Saver Mode Tab
Energy Saver Mode
Item Description
Energy Saver Mode 1 Select [Active] to set the machine to enter Energy Saver mode 1 if the
machine has been idle for about 30 seconds.
It takes less time to recover from Energy Saver mode 1 than from power-off
state or Energy Saver mode 2, but power consumption is higher in Energy
Saver mode 1 than in Energy Saver mode 2.
Energy Saver Mode 2 • Europe
Select [30sec] or specify the period of time (1-20min) for the machine
to enter Energy Saver mode 2.
• Countries other than European countries
Select [30sec] or specify the period of time (1-240min) for the
machine to enter Energy Saver mode 2.
The machine consumes less power in Energy Saver mode 2 than in Energy
Saver mode 1, but it takes longer to recover from Energy Saver mode 2
than from Energy Saver mode 1.
• The printer recovers from Energy Saver mode when it receives a print job or when the [Power] key
is pressed for less than 3 seconds.
Configuring the Administrator Settings
123