Problem Solution
Images are cut off, or excess pages
are printed.
If you are using paper whose size is smaller than the paper
size selected in the application, use the same size paper
selected in the application. If you cannot load paper of the
correct size, use the reduction function to reduce the image,
and then print.
See the printer driver Help.
When You Cannot Print Clearly
Problem Solution
The whole printout is blurred. • The paper being used may be damp. Use paper that has
been stored properly. See page 42 "Supported Paper".
• If you enable [Toner Saving] under [System Settings],
printing is generally less dense.
• The print cartridge is almost empty. If "Replacement
Required: Print Cartridge" appears on the screen, replace
the indicated print cartridge.
• Condensation may have occurred. If rapid change in
temperature or humidity occurs, use this machine only
after it has acclimatized.
Toner smears appear on the print
side of the page.
• The paper setting may not be correct. For example,
although you are using thick paper, the setting for thick
paper may not be specified.
Check the printer driver's paper settings.
See the printer driver Help.
• Check that the paper is not curled or bent. Envelopes can
be curled easily. Flatten out the paper before loading it.
See page 26 "Loading Paper".
Printer Problems
167
To Next Page
Loading...
Need help?
General
Weight and Dimensions
