Rigol DS1000B Series Programming Guide

Command Systems RIGOL
Programming Guide for DS1000B Series
2-1
Chapter 2 Command Systems
In this chapter, we will introduce every comand in the DS1000B command systems.
The introduction inludes command format, function description, query/Returned
Format and some other notices that should pay attention to during using the
commands.
DS1000B series support the following command subsystems:
 General Command
 SYSTem Command
 ACQuire Command
 DISPlayDISPlay Command
 TIMebase Command
TRIGger Command
Trigger Control
EDGE Trigger
PULSe Trigger
VIDEO Trigger
PATTern Trigger
ALTernation Trigger
 MATH Command
 CHANnel Command
 MEASure Command
 WAVeform Command
 KEY Command
 SAVe/RECall Command
 MASK Command
 CURSor Command
 Other Command

Rigol DS1000B Series Specifications

General

Brand	Rigol
Model	DS1000B Series
Category	Test Equipment
Language	English