Chapter 6 System Function RIGOL
RSA3000 User Guide 6-15
Save
RSA3000 allows you to save various types of files to the internal or external memory.
Press Save on the front panel to enter the file saving menu. The available file types
include: State, Trace+State, Measurement Data, Limit, Screen Image, and FMT (only
available for RTSA).
State
Press State to enter the state saving menu. The state can be saved to the register or
the file.
1. Save
Press this key to save the current state in the default filename or user-defined
filename.
The default state filename is determined by the following methods:
⚫ If you haven't input a filename by pressing the Save As key, its default
filename is state<n>.sta. Wherein, n refers to the file number of the
filenames that are named based on the naming mode in the current file
directory. The value of <n> is the existing maximum file number plus 1. For
example, if 3 files (state1.sta、state2.sta、state5.sta) exist in the current
directory, then the new filename for the file that you want to save should be
state6.sta by default.
⚫ If you have pressed the Save As key to input the filename abc, then the file
is saved to be "abc.sta". After that, press the Save key again, another file is
saved automatically with the filename "abc1.sta".
2. Save As
Press this key and then use the numeric keypad on the front panel to input the
filename. Then, press Save to save the corresponding state file.
You can also touch the screen or use the mouse to touch or click the Save As
menu, and then input the filename with the keypad.
3. Register1 through Register16
When any one of the items from Register1 to Register16 is selected, the current
state of the instrument will be saved to the corresponding register. The register
supports quick save and recalling instrument state. The register menu displays
the time for saving the instrument state.
To Next Page
Loading...
Need help?
General
