Name: Robomow RK2000
Brand: Robomow
Rating: 4 (1 reviews)

To Next Page

To Previous Page

50 51

Test wire

It is now time to test and adjust the location of the perimeter wire.

1) Remove the mower from the Base Station and place it facing the wire

behind the base.

2) Press the Go Home button.

The mower will drive forward and begin to follow the perimeter wire. As

it follows the wire, observe for the following possible situations:

A. Wire too close to obstacles

If the mower encounters an obstacle while following the wire, it will

maneuver around it. In these situations, adjust the wire further away

so that the mower will clear the obstacle without having to depart the

wire and navigate around it.

B. Wire too close to edge of lawn

If the mower falls o the edge of the lawn as it travels the wire,

adjust the wire further inward away from the edge.

C. Wire too far from obstacles and / or edge of lawn

Your mower has the unique ability to mow very close to obstacles

and the edge of your lawn. If you see areas where it would not mow

as close as you would like, simply adjust the wire further out. Just be

careful to avoid situations A & B.”

Other manuals for Robomow RK2000

Questions and Answers:

Need help?

Do you have a question about the Robomow RK2000 and is the answer not in the manual?

General